FANUC 3D Five-axis Control System
Professional 3D five-axis control system enables simple but efficient man-machine interaction, intelligent display, and one-bottom start, therefore, which is friendly to users and easy to be operated. With special down-lead technology for thick sheets, sharp corners are above normal quality.
Automatic nesting comes true by FANUC 30i-LB nesting system.
Once Forming of 45° Bevel
Our self-developed high-power laser cutting heads work with FANUC 3D five-axis control system to break through conventional 0° straight section and make 45° bevel possible.
V-, X- and Y-shaped bevel can take shape only once, which helps to reduce working procedures and enhance cutting efficiency.
Cut Large-format Thick Sheets
Thickness of long-term batch stable cutting: 20mm+, extreme thickness: 100mm
Max. processing format 24000*5000mm, allow customization of format length
Cut both sheet metals and large-sized profile steel.
P30/P20/P10/P06 Laser Cutting Head (6-30kW)
The four kinds of self-developed laser cutting heads, covering medium-to-high power, high-power and ultra-high power, can cut thicker metal sheets stably under high temperature, high pressure and high speed.
Environmental-friendly Ventilation System
With it, cutting smoke dust is blown to one side from another side of machine bed and sucked into the special air ducts under the support of right ventilation system.
The machine bed is divided into small zones and corresponding air dampers will be opened according to cutting head position, so as to offer intensive suction.
Full-hollow Carbon Steel Welded Machine Bed
GF-B adopts full-hollow machine bed, which performs better in cutting speed and high precision. Moreover, it will work for long term even under high temperature.
Our machine bed is made of several sections, therein, each section is 5-7m or prolonged as required by users.
Machine bed is easy to be disassembled and installed. Users will put into production quickly.
Module-based platform patented (No. ZL201921441366.7) and self-developed by HSG is easy to be dismantled and installed, without any effect on production.
Our machine bed is apart from the platform to cut off the generant high-temperature heat, keep batch cutting stable, prolong service life and ensure its high dynamic performance.
Well-servicedce Safety Measures
GF-B is suitable for industries presenting high demands for the strength of sheet welds.
